Back to top
Send SMS Send Inquiry
29675415
      Home » Products » HEAT SHRINKABLE TUBE » HEAT SHRINKABLE TUBE

      HEAT SHRINKABLE TUBE

      HEAT SHRINKABLE TUBE
      HEAT SHRINKABLE TUBE
      Send Inquiry
      Product Code : 01
      Product Description

      Heat shrinkable Dual wall tubes are designed to provide environmental sealing in automotive splices. Hot melt adhesive prevents entry of moisture between the wires.

      Technical Specification

      All dimensions are in mm

      • Properties
      • Standard
      • Typical Value
      • Physical:
      • Tensile Strength
      • ASTM-D-638
      • 16 N/mm2 (Min.)
      • Elongation
      • ASTM-D-638
      • 300% (Min.)
      • Water Absorption
      • ASTM-D-570
      • 0.15% (Max.)
      • Low Temperature Flexibility
      • ASTM-D-2671li>
      • -55% (Max.)
      • Specific Gravity
      • ASTM-D-792
      • 1.4
      • Thermal:
      • Operating Temperature
      • IEC216
      • -55°C to +125°C
      • Heat Shock (2500C for 4 hrs)
      • -
      • No dripping, cracking or flowing
      • Chemical:
      • Copper Corrosion
      • ASTM-D-2671-B
      • Good
      • Chemical Resistance
      • ASTM-D-2671
      • Good
      • Electrical:
      • Dielectric Strength
      • ASTM-D-2671
      • >20kv / mm
      • Dielectric Constant
      • ASTM-D-150
      • 3.0 (Max.)
      • Volume Resistance
      • ASTM-D-257
      • 10314 Ohm cm (Min.)
      APPLICATIONS:
      • The tubing is inserted over the splice area and on heating the tube starts shrinking and the adhesive melts and squeezed around where the wires are crimped or welded connectors.
      • Light duty wire harnessing for electrical and electronic applications.
      • Provides electrical insulation and protection for in-line components.
      • Used as strain relief for electrical wire connection.
      • Good flexibility and provides mechanical protection.
      • Flame retardant tubes lowers the risk of electrical fires.
      GENERAL PROPERTIES OF PRODUCT:
      • 4:1 Shrink ratio
      • Resistance to chemical, copper corrosion and fungus.
      • UV stabilized.
      • Standard Colors: Black
      SELECTION CHART

      All dimensions are in mm

      • Part No/Size
      • D (min)
      • d (AL)
      • d (J) (max)
      • Recovered Wall Thickness (min)
      • Length (L) mm (min)
      • GDWH-1
      • 5.75
      • 1.25
      • 2.65
      • 0.60
      • 0.60
      • 50
      • GDWH-2
      • 7.50
      • 1.65
      • 3.45
      • 0.70
      • 1.40
      • 50
      • GDWH-3
      • 11.00
      • 2.40
      • 4.65
      • 0.80
      • 1.80
      • 65
      • GDWH-4
      • 14.00
      • 3.00
      • 5.90
      • 0.90
      • 2.15
      • 65
      • GDWH-5
      • 18.30
      • 4.35
      • 7.40
      • 0.90
      • 2.20
      • 75

      D, d- Dia as Supplied; A - Adhesive Liner; W,J - Jacket; Tf - Free Recovered Thickness, L - Length as Supplied

      WIRE HARNESSING AND DUST PROTECTION COVERS
      Heat Shrinkable Breakouts:
      • voltage-tape
      • voltage-tape
      Heat Shrinkable Boots:
      • voltage-tape
      • voltage-tape
      Terminal Covers:
      • voltage-tape
      • voltage-tape
      End Caps:
      • voltage-tape
      • voltage-tape
      Heat Shrinkable Tube:
      • voltage-tape
      • voltage-tape

      GALA SHRINK FIT
      X