Heat Shrink Tubes & Sleeves Manufacturer, Supplier From Mumbai, Maharashtra

Thin Wall Heat Shrink Tube 2:1 Commercial Grade (GLC)

Black thin-wall 2:1 heat-shrink polyolefin tube for light-duty wire harnessing, in-line component insulation, strain relief and switchgear busbar insulation. 17 sizes from 6 to 100 mm supplied ID, on spools or in 1.2 m cut lengths.

Price: 1 INR/Piece

Send Inquiry

Heavy Wall Heat Shrink Tube for Cable Joints (GHW)

Black cross-linked polyolefin heat-shrink tube with a heavy 2.4 to 4.5 mm recovered wall, 23 sizes up to 425 mm supplied ID. Gives mechanical protection and the outer seal on underground cable straight-through joints.

Price: 1 INR/Piece

Send Inquiry

Fibre Optic Splice Protection Sleeve

Heat-shrink sleeve that protects a fused optical fibre splice, restoring environmental and mechanical protection to the fibres coating or buffer after splicing. Clear outer tube with a reinforcing rod inside.

Price: 1 INR/Piece

Send Inquiry

Heat Shrink Fibre Optic Closure Sealing Tube and Cable Entry Kit (GSF)

Adhesive-lined heat-shrink tube that insulates and seals each cable entry at the base of a fibre optic splice closure. Sold as tubes (8 sizes, 12 to 75 mm) or as a cable entry sealing kit with tapes, tissues and a branch-off clip.

Price: 1 INR/Piece

Send Inquiry

Thin Wall Heat Shrink Tube 3:1 Commercial Grade (GLC3)

Flexible single-wall heat-shrink tube with a 3:1 shrink ratio for insulating in-line components, light-duty wire harnessing and strain relief. Seven sizes from 9 to 50 mm supplied ID, six colours, on 25 m spools.

Price: 1 INR/Piece

Send Inquiry

Heat Shrink Tube for CATV Connectors and Tap Terminations (GBT)

Adhesive-lined heat-shrink tube for broadband CATV networks: shrinks over coaxial connectors and tap terminations to give mechanical protection and a waterproof seal. Also for CCTV connections and control-cable splices. 8 sizes, 12 to 70 mm.

Price: 1 INR/Piece

Send Inquiry

Double Layer Heat Shrink Tube - Insulating and Semi-Conductive (GDLT)

Co-extruded heat-shrink tube with a red insulating inner layer and a black semi-conductive outer layer, giving insulation and outer screen in one shrink on power cable straight-through joints. 8 sizes, 30 to 120 mm supplied ID.

Price: 1 INR/Piece

Send Inquiry

Thin Wall Heat Shrink Tube 3:1 High Shrink Ratio (GSC 3X)

Thin-wall cross-linked polyolefin heat-shrink tube with a 3:1 shrink ratio, 17 sizes from 1.5 to 100 mm supplied ID, eight colours including clear. For harnessing, insulating components and covering odd-shaped joints.

Price: 1 INR/Piece

Send Inquiry

Co-Extruded Heat Shrink Tube - Medium and Heavy Wall (GMWR / GHWR)

Black co-extruded cross-linked polyolefin heat-shrink tube in medium (GMWR) and heavy (GHWR) wall, 10 sizes each from 12 to 130 mm, with hot-melt adhesive lining up to 50/16 for waterproof sealing of joints, splices and pipe connections.

Price: 1 INR/Piece

Send Inquiry

Heat Shrink Stress Control Tube for Cable Terminations (GVOT)

Cross-linked polyolefin heat-shrink tube with an integrated stress-control layer, used as part of Gala heat-shrink cable terminations up to 24 kV. Controls electrical stress at the screen cut and seals against moisture. 6 sizes, 30 to 85 mm.

Price: 1 INR/Piece

Send Inquiry

Heat Shrink Stress Control Tube for MV Cable Joints and Terminations (GST)

Black heat-shrink stress control tube that grades the electric field where the screen of an MV power cable is cut back, in heat-shrink joints and terminations up to 33 kV (36 kV equipment). Four sizes, 30 to 60 mm supplied ID.

Price: 1 INR/Piece

Send Inquiry

Thin Wall Heat Shrink Tube for 150 C Applications (GSCT)

Thin-wall 2:1 cross-linked polyolefin heat-shrink tube rated for 150 deg C continuous operation, 19 inch-series sizes from 1.2 to 152.4 mm, seven colours. For wiring and components in hotter locations, up to 1.1 kV.

Price: 1 INR/Piece

Send Inquiry