Heat Shrinkable Moulded Shapes Manufacturer, Supplier From Mumbai, Maharashtra

Heat Shrink Transition Boot for Cable Harness - Y / T / 2 3 4 Way

Black moulded heat-shrink transitions that seal and strain-relieve the point where a cable harness divides into two, three or four branches. Y, T, Q, E, 2-way, 3-way and 4-way shapes; 41 sizes in three material grades.

Price: 1 INR/Piece

Send Inquiry

Heat Shrink Tri-Core Rain Shed for 3 Core Terminations (GRST)

Red heat-shrinkable rain shed with three collars, one per core, that fits over all three cores of a termination at once. Adds creepage distance and breaks the water path without lengthening the tails. Non-tracking polyolefin, mastic-lined.

Price: 1 INR/Piece

Send Inquiry

Bushing Cap for Extensible RMU and GIS Bushings - Heat Shrink (GEK)

Heat-shrinkable cap that seals and insulates the end of an unused bushing on an extensible ring main unit or GIS panel against water and moisture, removed when the panel is extended. For 11 kV equipment, two sizes.

Send Inquiry

Heat Shrink Connector Boot - Straight / Right Angle / P Type / L Type

Black moulded heat-shrink boots that seal and strain-relieve the joint between a cable and its circular connector. Straight, right-angle, P-type and L-type shapes, with lip and rib versions; 109 sizes in three material grades.

Send Inquiry

Heat Shrink Semi-Conductive Cable Breakout for 3 Core PILC Cable (GCB)

Black semi-conductive heat-shrink breakout for 3-core PILC belted cable. It seals the crutch and gives each core its own screen where the belt insulation is removed. Red-mastic lined, seven sizes.

Send Inquiry

Heat Shrink Rain Shed / Creepage Extension Skirt (INSULSHED GRS)

Red heat-shrinkable rain shed of non-tracking cross-linked polyolefin, mastic-lined. Shrunk onto a termination core, it adds surface creepage distance without lengthening the tail and breaks the water path in rain. Indoor and outdoor use.

Send Inquiry

Heat Shrink LV Cable Breakout 2 to 7 Core up to 1.1 kV (INSULCORE)

Black heat-shrinkable breakout with hot-melt adhesive lining that seals the crutch of 2, 3, 4, 5, 6 and 7-core LV cables up to 1.1 kV. 71 sizes for PVC, XLPE, rubber and PILC cables.

Send Inquiry

Heat Shrink Non-Tracking Cable Breakout 3 Core (INSULCORE Red GAB)

Red heat-shrinkable 3-core breakout in tracking-resistant cross-linked polyolefin, mastic-lined, for sealing the crutch of 3-core PVC and PILC cables at terminations exposed to weather, UV and pollution. Eight sizes.

Send Inquiry

Heat Shrink Right Angle and Straight Boot for Bushings (ANGLEBOOT)

Red heat-shrinkable boots that insulate bushing connections inside cable termination boxes where phase-to-phase and phase-to-earth clearances are less than normal air clearance. Right-angle (GRB) and straight (GSB) shapes, four sizes each.

Send Inquiry

Heat Shrinkable Moulded Shapes

Heat Shrink Transition Boot for Cable Harness - Y / T / 2 3 4 Way

Heat Shrink Tri-Core Rain Shed for 3 Core Terminations (GRST)

Bushing Cap for Extensible RMU and GIS Bushings - Heat Shrink (GEK)

Heat Shrink Connector Boot - Straight / Right Angle / P Type / L Type

Heat Shrink Semi-Conductive Cable Breakout for 3 Core PILC Cable (GCB)

Heat Shrink Rain Shed / Creepage Extension Skirt (INSULSHED GRS)

Heat Shrink LV Cable Breakout 2 to 7 Core up to 1.1 kV (INSULCORE)

Heat Shrink Non-Tracking Cable Breakout 3 Core (INSULCORE Red GAB)

Heat Shrink Right Angle and Straight Boot for Bushings (ANGLEBOOT)

Quick Links

Our Products