Call us now :08045804037
Send Inquiry
Send InquiryWorm Drive Hose Clamp for Cable Jointing Kits
MOQ : 1 Piece
Worm Drive Hose Clamp for Cable Jointing Kits Specification
- Usage & Applications
- Clamping components and connections in cable splice and jointing assemblies; general hose and duct clamping
- Install Type
- Screwdriver or nut driver; adjustable and re-usable
- Product Type
- Worm-drive band clamp with captive screw
- Material
- Stainless steel, or steel electroplated for corrosion resistance
About Worm Drive Hose Clamp for Cable Jointing Kits
Cable splice and jointing assemblies often need a band clamp to hold a component, sleeve or earthing connection firmly around the cable. Gala supplies worm-drive band clamps for this, as accessories for its jointing kits and on their own.
Each clamp has three parts. The band carries a thread pattern that starts at the free end and runs far enough for the clamp to tighten onto the smallest diameter in its working range. The screw is held captive in the housing, so it cannot drop out on site, and the housing is fixed to the band and is not readily removable. Clamps are made in stainless steel; any clamp made from a material that is not corrosion resistant is electroplated to protect it.
Tightening needs only a screwdriver or nut driver, and the clamp can be loosened and re-used. Besides cable jointing, the same clamps suit hoses, ducts, flexible conduits and sleeves wherever a strong, adjustable band clamp is needed.
Sizes are chosen by the diameter range to be clamped; ask for the range you need.
Supplied by Gala, India. Datasheet and size selection on request.
Specifications
- Brand: Gala
- Product type: Worm-drive band clamp with captive screw
- Material: Stainless steel, or steel electroplated for corrosion resistance
- Application: Clamping components and connections in cable splice and jointing assemblies; general hose and duct clamping
- Installation: Screwdriver or nut driver; adjustable and re-usable
- Country of origin: India
- Construction: Threaded band, captive screw, housing fixed to the band
Applications: Cable jointing contractors, jointing kit assemblers, electrical maintenance, automotive and industrial hose fitting, HVAC ducting
Tell us about your requirement
Price:
Quantity
Select Unit
- 50
- 100
- 200
- 250
- 500
- 1000+
Additional detail
Mobile number
Email
More Products in Jointing Kit Accessories Category
Non-Shrinkable EPDM Insulation Tape for Cable Jointing (GNT)
Minimum Order Quantity : 1 Piece
Product Type : Nonshrinkable rubber insulation tape (coldflow, selfamalgamating)
Material : EPDMbased rubber compound
Install Type : Stretch to twothirds width, halflap, levelwound layers; no heat
Usage & Applications : Voidfree insulation buildup in cable joints and repairs on XLPE, PVC, PILC and rubbersheathed cables
Size : GNT 1 25 mm wide (min), 0.75 mm thick, 10 m long (min)
Branch Off Clip for Heat Shrink Cable Joints and Closures (GBOC)
Minimum Order Quantity : 1 Piece
Product Type : Branchoff clip with hotmelt adhesive insert, heatshrink accessory
Material : Clip with hotmelt adhesive insert
Install Type : Push over the sleeve end between the two cables, then heatshrink the sleeve
Usage & Applications : Sealing two cables leaving one heatshrink sleeve or closure port, in telecom joints and fibre optic closures
Size : GBOC 1 to GBOC 3; overall length 64 to 125 mm
Mastic Sealing Tape for Cable Joints - Black Red and Yellow
Minimum Order Quantity : 1 Piece
Product Type : Mastic sealing tape (coldapplied), strips and rolls
Material : Butyl rubber based mastic sealant on siliconecoated paper liner
Install Type : Cold applied; peel off the liner and press or wrap into place
Usage & Applications : Water sealing and void filling in heat shrink cable joints and terminations, lugs, breakouts and connectors; telecom sealing (black)
Size : Width 20 to 50 mm; length 100 mm strips to 25 m rolls; thickness 0.7 to 2.5 mm
Constant Force Spring for Cable Screen Earthing in Joints
Minimum Order Quantity : 100 Pieces
Product Type : Constant force (roll) spring for solderless earth connections on cable screens and armour
Material : Stainless steel (per Gala sheet)
Install Type : Wound over the earth braid on the screen or armour by hand; no soldering
Usage & Applications : Clamping earth braids or wires onto cable screens and armour in MV joints and terminations
Send InquiryOur Products
- Busbar Sleeves
- Insulation Enhancement Products
- Screened Separable Connectors
- Heat Shrinkable Moulded Shapes
- Heat Shrink Tubes & Sleeves
- Switchgear Insulation Products
- Cable Sealing & Repair Products
- Overhead Line Covers
- Cable Terminal Protectors & Boots
- Cable End Caps
- Pole Protection Products
- Cold Shrink Products
- Cable Jointing & Termination Kits
- Jointing Kit Accessories
- Electrical Insulating Shroud (Insulshroud)
- Polymeric Insulators
- Pipeline & Corrosion Protection Products
404/406, 4th Floor, Eureka Tower, New Link Road,
Behind Toyota Showroom, Mindspace, Malad West Mumbai - 400064, Maharashtra, India
Mrs. Linette F D'souza
(Executive Assistant to MD)
Mobile :08045804037
Send Inquiry
Send SMS
Developed and Managed by Infocom Network Private Limited.
