Back to top
PVC Terminal Insulation Cap for Cable Lugs (TERMICAP TCV)
PVC Terminal Insulation Cap for Cable Lugs (TERMICAP TCV)

PVC Terminal Insulation Cap for Cable Lugs (TERMICAP TCV)

MOQ : 1 Piece

PVC Terminal Insulation Cap for Cable Lugs (TERMICAP TCV) Specification

  • Installation Guideline
  • Pushed over the crimped terminal by hand
  • Size
  • 12 sizes; narrow-end diameter 3.2 to 30 mm, length 15 to 79 mm
  • Product Type
  • Terminal insulation cap, push-on (not heat-shrinkable)
  • Tensile Strength
  • 12 N/sq mm minimum (ASTM D638)
  • Application
  • Insulating and colour-coding crimped cable lugs and wire-end terminals
  • Usage & Applications
  • Insulating and colour-coding crimped cable lugs and wire-end terminals
  • Color
  • Blue, yellow, red, black, white, green
  • Operating Temperature
  • -20 deg C to +115 deg C continuous
  • Material
  • Flexible PVC
 
 

About PVC Terminal Insulation Cap for Cable Lugs (TERMICAP TCV)

TERMICAP is Gala's flexible PVC insulating cap for wire-end terminals and cable lugs crimped onto power cables. Once a lug is crimped, its barrel and the bare conductor next to it are left exposed. The cap slips over the crimp and the end of the cable insulation, insulating the bare metal and protecting it against accidental contact.

The caps are made in blue, yellow, red, black, white and green, so they also serve to identify phases, neutral and earth at a glance in panels, switchboards, motor terminal boxes and distribution boards. They are pushed on by hand and need no heat or tools.

Twelve standard sizes, TCV 12 to TCV 3251, cover narrow-end diameters from 3.2 mm to 30 mm and lengths from 15 mm to 79 mm, so the range takes small control-wire terminals through to large power-cable lugs. Each cap is a stepped cylinder: a narrow closed section over the lug barrel and a wider section over the cable insulation. Gala also develops custom sizes, shapes and colours to the customer's requirement.

Manufactured by Gala in India. Datasheet and size selection on request.

Specifications

  • Brand: Gala
  • Product type: Terminal insulation cap, push-on (not heat-shrinkable)
  • Material: Flexible PVC
  • Colour: Blue, yellow, red, black, white, green
  • Operating temperature: -20 deg C to +115 deg C continuous
  • Size range: 12 sizes; narrow-end diameter 3.2 to 30 mm, length 15 to 79 mm
  • Application: Insulating and colour-coding crimped cable lugs and wire-end terminals
  • Installation: Pushed over the crimped terminal by hand
  • Country of origin: India
  • Tensile strength: 12 N/sq mm minimum (ASTM D638)
  • Elongation: 350 % minimum (ASTM D638)

Sizes

  • TCV 12 | D1 3.2 | D2 3.5 | D3 3 | L 15 | F 8
  • TCV 21 | D1 3.5 | D2 4.5 | D3 3.8 | L 18 | F 10
  • TCV 50 | D1 4.5 | D2 5.5 | D3 4.5 | L 21 | F 10
  • TCV 53 | D1 5 | D2 6 | D3 5 | L 25 | F 10
  • TCV 60 | D1 8 | D2 10 | D3 8 | L 27 | F 13
  • TCV 221 | D1 9.5 | D2 12 | D3 8 | L 30 | F 16
  • TCV 381 | D1 12 | D2 14 | D3 10 | L 35 | F 18
  • TCV 601 | D1 14 | D2 16.5 | D3 14 | L 42 | F 23
  • TCV 100 | D1 18 | D2 22 | D3 16 | L 54 | F 26
  • TCV 501 | D1 22 | D2 24 | D3 22 | L 67 | F 33
  • TCV 2501 | D1 26 | D2 37 | D3 26 | L 79 | F 38
  • TCV 3251 | D1 30 | D2 37.5 | D3 30 | L 78 | F 38
  • All in mm. D1 narrow (closed) section, D2 wide section inner diameter, D3 open mouth, L overall length, F length of the narrow section. Source: Gala BUSCAP and TERMICAP catalogue sheet, February 2024.

Applications: Panel builders, switchboard and distribution board manufacturers, motor and control panel makers, cable harness and assembly shops, electrical contractors, transformer and switchgear manufacturers

Tell us about your requirement
product

Price:

Quantity
Select Unit

  • 50
  • 100
  • 200
  • 250
  • 500
  • 1000+
Additional detail
Mobile number

Email

More Products in Switchgear Insulation Products Category

Insulation Boot for Draw-Out Circuit Breaker Contact Arms

Insulation Boot for Draw-Out Circuit Breaker Contact Arms

Minimum Order Quantity : 1 Piece

Color : Brick red

Product Type : Insulating boot for drawout circuit breaker contact arms, removable and reusable

Size : Made to the breakers contactarm dimensions

Usage & Applications : Insulating the contact arms of drawout MV circuit breakers in power plants and substations

Application : Insulating the contact arms of drawout MV circuit breakers in power plants and substations

Heat Shrink Busbar Tape - Adhesive Coated (BUSTAPE GMT-2L)

Heat Shrink Busbar Tape - Adhesive Coated (BUSTAPE GMT-2L)

Minimum Order Quantity : 1 Piece

Color : Red

Product Type : Heat shrinkable busbar insulating tape, adhesive coated

Size : 50 mm wide x 15 m roll

Usage & Applications : Insulating MV busbar bends, joints and irregular connections; busbar repairs

Application : Insulating MV busbar bends, joints and irregular connections; busbar repairs

Heat Shrink Busbar Insulation Sheet - Adhesive Coated (BUSSHEET)

Heat Shrink Busbar Insulation Sheet - Adhesive Coated (BUSSHEET)

Minimum Order Quantity : 1 Piece

Color : Red

Product Type : Heat shrinkable busbar joint insulation sheet, adhesive coated

Size : For busbars 25 to 150 mm wide; sheet length up to 1200 mm

Usage & Applications : Insulating bolted busbar tees, elbows and straight joints in MV switchgear and panels

Application : Insulating bolted busbar tees, elbows and straight joints in MV switchgear and panels

Busbar End Cap - Flexible PVC Push-On (BUSCAP)

Busbar End Cap - Flexible PVC Push-On (BUSCAP)

Minimum Order Quantity : 1 Piece

Color : Blue, black, red, yellow, orange, green, dark blue

Product Type : Busbar end cap, pushon (not heatshrinkable)

Size : Busbar 15 x 5 mm to 200 x 12 mm (18 sizes)

Usage & Applications : Insulating the ends of live busbars in switchgear, panels and busducts

Application : Insulating the ends of live busbars in switchgear, panels and busducts